Electrics-Ignition - Motorcycle Storehouse

973967 - Motogadget, mo.lock digital NFC ignition switch

NOTE: The images shown are for reference only, the actual product may differ.
Therefore please always read the description or read on the corresponding catalog page.

Enlarge article image    Enlarge article image    Enlarge article image    Enlarge article image    Enlarge article image    Enlarge article image    

Motogadget, mo.lock digital NFC ignition switch

Article-No.: 973967
163,71 €

Part Description

Motogadget, mo.lock digital NFC ignition switch

NFC (Near Field Communication) is a variation of RFID (Radio Frequency IDentification) and extremely tamper-proof. The mo.lock digital ignition switch is used to switch the ignition on/off to a distance up to approx. 20 to 40mm. The mechanical ignition switch can be replaced by the mo.lock ignition switch, allowing a hidden mount for a clean look. It can directly switch an automotive relay of up to 40A. It comes with 2 'keys', additional keys can be purchased separately and 'learn' to switch the mo.lock. The mo-lock NFC has an RGB LED on the front which indicates the status by color. Standby current in switched-off mode is only 3.2 mA, reduces to 1.5 mA after 16 hours and after 8 days to 0.75 mA, for battery protection. The mo.lock NFC (32mm diameter x 12mm high without terminals) comes with an automotive 40A relay, mount bracket, 2 NFC keys and detailed instructions. - NFC technology is tamper-resistant - Each key has a unique code - The key first activates the mo.lock without touching it and then, via the relay, the entire on-board system - Neither key nor mo.lock NFC suffer from mechanical wear - The key requires no battery - No overload or scorched pins possible due to indirect switching via the 40A main relay - The mo.lock NFC is very compact an can be mounted hidden in many places - Water tight and vibration resistant because of the moulded-in construction - Keys can be easily purchased and 'learned' to any mo.lock NFC - your integrated locksmith - A switching distance of 2 - 4 cm ensures convenient switching while excluding the possibility of accidental engagement - An integrated RGB-LED shows the status of the mo.lock while switching, connecting and 'teaching' new keys Transmitter/receiver, diameter of installed assembly: 32 mm Height: 12 mm without terminals and bracket Weight incl. cable: approx. 35 g Mounting threads: 1 x M3 threaded hole on back side Operating voltage: 8V - 18V Operating temperature: -20 °C to +80 °C. Note: Not for use with active immobilizers. Note: See 973970 for a replacement 'key'. Note: See 973968 or 973969 for wiring kits to fabricate the wiring harness for your mo.lock ignition switch.

Spezification

Article-No.:
973967
Manufacturer/Distribution:
motogadget GmbH / Motorcycle Storehouse
Packaging Unit:
1
Catalog page:
1202