9.87 for more details check www.custom-chrome-europe.com APPAREL HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT SEATS & TOURING FOOT CONTROLS Front Back Feuling Cam Support Plates For Twin Cam Models • • Increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The cam plate is blue printed and matched to the Feuling oil pump which allows the engine to take full advantage of the increased volume from the Feuling oil pump • • Made from 7075 billet aluminum and hard anodized which increases the strength and hardness of the camplate, holds tighter tolerances under temperature and eliminates the pinion shaft bushing • • Increased oil flow to pinion shaft and connecting rod bearings • • Tighter cam bearing bore tolerance for improved press fit • • Pressure relief valve and spring are designed for increased volume and pressure, eliminating the need to stretch the spring or use a shim • • Decreases engine temperature by 20 degrees • • When matched with the Feuling Race Pump rear wheel power gains of three horsepower and four ft/lbs of torque are achieved • • For use ONLY with the Feuling oil pumps • • Includes bearing retainer plate and hardware • • Bolts into stock location 622151 Fits Twin Cam 88 engines with gear drive cams (except 2006 Dyna Glide models) from 99-06 622152 Fits Twin Cam 88 engines with chain drive cams (except 2006 Dyna Glide models) from 99-06 622153 Fits 06-17 Dyna, 07-17 Softail, 07-16 Touring High Flow Conversion Camplate Chain Drive • FEULING HIGH FLOW camplates for TC engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings resulting in 25-35 degree cooler engine temperatures. • Made from 7075 billet aluminum which 50% harder and stronger than the factory, SE and other aftermarket camplates. The 7075 increases the strength and hardness of the camplate, holding tighter tolerances under temperature eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing like properties. • FEULING camplates are blue printed and matched to the Feuling oil pumps, which allow the Twin Cam engine to take full advantage of the increased volume from the high flow oil pumps resulting in cooler quieter engine operation. • Tighter cam bearing bore tolerance for improved press fit • Camplates are pressure tested & pressure relief valve and spring are pre-set and designed for the increased volume and pressure, eliminating the need to stretch the spring or use a shim. • When matched with the Feuling Race Series Oil Pump rear wheel power gains of 3 Horsepower and 4 ft/lbs of Torque are achieved. • For use ONLY with the Feuling oil pumps • Bolts into stock location • Made in the U.S.A. Part#: 917777 , Fitment: 99-05 Dyna, 00-06 Softail, 99-06 Touring , Fitment Note: Require Feuling oil pump , Color: Red , Material: Aluminium , Unit: Each , Qty.: 1 OE+ Gear or Chain Drive Camplate FEULING® OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULINGs® high tolerance standards. The pressure relief valve and spring are pre-set, matched and seated by FEULING® with a full pop off pressure of 50-60 psi. OE+ camplates are a direct bolt in replacement and will accept the factory oil pump. As with all FEULING® components, the competitively priced OE+ camplates are designed and manufactured to the highest standard of quality with proven FEULING® performance. • Chain and Gear Drive for use with 07-17 style oil pumps, compatible with FEULING® oil pumps: #622150 and #917773 • Tighter cam journal bore tolerance for improved cam fitment • Added Cam journal oil groove for cold start up protection and increased cam journal lubrication • Added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear Part#: 917775 , Fitment: 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike , Color: Silver , OEM #: 25355-06 , Material: Aluminium , Unit: Each , Qty.: 1
RkJQdWJsaXNoZXIy ODQ0NDEw