CCE Edition Forty Eight | Update by BMG

UD.170 Milwaukee Eight Camshaft Milwaukee 8 bikes are available in both 107 and 114 cubic inch engine sizes. With high efficiency four-valve heads, M8 engines show great potential for performance gains especially with new design Andrews M8 series camshafts. Keep in mind, cam timing specs for four valve heads look very different from camshafts designed for two valve applications. Engines with four valve heads have much greater flow efficiency so cam timing durations are a lot shorter. Unit: Each, Qty.: 1.0 PART# FITMENT FITMENT NOTE DESCRIPTION 900600 18-22 Softail, 17-22 Touring For 107 and 114 CUI engines, stock valve springs Bolt in cam, more torque for riding with 107 inches engines, rapid torque rise (1000–5500 RPM) 900601 18-22 Softail, 17-22 Touring For 107 CUI engines, stock valve springs More power from stock engines (1000–5800 RPM), Max. Torque=112 ft.lbs.@3440RPM, Max.Power=96HP@5360 RPM 918046 18-22 Softail, 17-22 Touring, 17-22 Trike For 107 and 114 CUI engines, stock valve springs Bolt in cam, 107-114 inches. Big power (127 ft. lbs. and 109 HP (from 1200 to 5500 RPM) 900602 18-22 Softail, 17-22 Touring For 114 CUI and all around riding, high lift valve srings More torque and power for bigger engines 114 inches and all around riding (1500–5700 RPM) 900603 18-22 Softail, 17-22 Touring For bigger than 114 CUI engines, high lift valve srings More torque and power for modified engines (1600–5500 RPM) 919916 18-22 Softail, 17-22 Touring, 17-22 Trike For 107 and 114 CUI engines, stock valve springs The cam for 117, 124, 143 engines. More torque and power through entire RPM range (1600–5500). 505 Reaper Chain Drive Cam 505 Bolt-in REAPER cams for XLs producing a wide power band in stock engines, a great way to take a Sporty to a hot new level of performance. Split lift camshaft with .505 lift on the intake and .515 lift on the exhaust produce a solid power band with top fuel sound. Can be used with stock pushrods and valve-springs, FEULING recommends matching new camshafts with new lifters but not required. Fits: 00-17 XL and 00-02 Buell as a direct bolt-in replacement for fine pitch pinion gear, cam set also fits 91-99 but requires pinion gear swap using HD # 24047- 00 to convert the 91-99 wide pitch pinion gear to a fine pitch setup. 917791 Fitment: 91-20 Sportster, Fitment Note: Requires fine pitch Pinion Gear OEM 24047- 00. New Lifters are rec- ommended., Lift, Intake .505, Exhaust .515, Unit: Kit, Qty.: 1.0 543 Reaper EVO Camshaft Reaper EVO 543 cam requires performance valve springs, see FEULING # 1120 or 1100, performance lifters recommended but not required. Will work with factory pushrods on engines with factory stack up, if deck height, cylinders or rocker boxes have been modified from stock then adjustable pushrods are required. Increased compression, cylinder head work and performance exhaust recommended but not required, increased compression is required for bottom end performance. RPM range 2,200 - 5,950. Grind: 543 • Intake: .543 Valve Lift, 15 Open, 43 Close, 238 Duration @ 53, .160 lift @ TDC, .104 Lobe Centerline • Exhaust : .553 Valve Lift, 56 Open, 12 Close, 248 Duration @ 53, .140 lift @ TDC, 112 Lobe Centerline 917780 Fitment: 85-94 FX Model, 91-98 Dyna, 85-99 Softail, Fitment Note: Requires Performance Valve Springs (917823 or 917820) . Performance Lifters, increased Compression, Cylinder Head work and Performance Exhaust recommended but not required. Will work with Factory Pushrods on OEM Engines., Lift, Intake .543, Exhaust .553, Material: Steel, Unit: Kit, Qty.: 1.0 Twin Cam Cam Chain The Twin Power cam chains have precision-ground side plates for smoother operation. Their specifications and performance are designed to be equivalent or superior to O.E. chains. Unit: Each, Qty.: 1.0 PART# FITMENT DESIGN OEM # 919801 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Secondary inner 25683- 06 919800 06-17 Dyna, 07-22 Softail, 07-22 Touring, 09-22 Trike Primary outer 25675- 06 919845 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Primary outer 25675- 06 919846 06-17 Dyna, 07-17 Softail, 07-16 Touring, 09-16 Trike Secondary inner 25683- 06 Shovel Rocker Arm 66-84 A high-quality replacement rocker arm for 66-84 Shovelhead models. Manufactured to O.E.M. specifications and tolerances. Fitment: 71-84 FX Shovel, 66-84 FL Shovel, Unit: Each, Qty.: 1.0 PART# DESIGN OEM # 919789 Rear Exhaust / Front Intake 17360- 66 919790 Rear Intake / Front Exhaust 17375- 66