dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL AUDIO, COMMUNICATION & MOUNTS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES DISCLAIMER: SEE PAGE 5 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. SECTION 5 See OLDBOOK For Early Model Applications All part numbers in BLUE are new for 2024. 449 TWIN TUNER II •Twin Tuner II has all the features of the original Twin Tuner and includes ignition timing control capability •Easily adjusts the OEM Delphi fuel-injection and ignition to match the requirements of performance parts including high-compression pistons/heads, camshafts, free-flowing exhausts, and low-restriction air filters – add 30% or subtract 20% fuel and retard spark timing up to 10° •You can use the mode and up/down push button switches to make fuel trim adjustments in the rpm and throttle position ranges required by most applications; the fuel trim value is displayed on a bright daylight-readable LED display •The Twin Tuner also has an advanced mode, using the optional USB Interface and PC Link Tuner software to make precise fuel adjustments and allows independent adjustments to the front and rear cylinders •May be compatible with other controller maps PART # DESCRIPTION 1020-0948 For 01-11 Big Twin and 07-13 XL (except 08-11 Touring models) TWIN TUNER FUEL-INJECTION CONTROLLER •Allows easy adjustments to OEM Delphi fuelinjection systems to improve performance and match the requirements of performance parts •Mode and up/down pushbutton switches make fuel trim adjustments in the rpm and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •May be compatible with other controller maps •Easy plug-in installation and setup PART # DESCRIPTION 1020-0834 For 03-07 Buell TCFI AUTO-TUNING FUEL INJECTION KITS •Offer real-time and continuous auto-tuning with monitoring, control and override capability •Utilizes high-end Alpha-N fuel control to eliminate any dependence on manifold pressure; unaffected by long duration and high overlap camshafts •Programmable user outputs for functions such as shift light, nitrous activation and electric shifter •Support all sensors including theft and security module •User-friendly PC Link software with 3-D graphics and easy spreadsheet editing capabilities for quick cell block changes •Built-in data logging that helps you diagnose real-world problems •Easy to install by simply replacing stock ECM and O2 sensors with those included in kit; detailed instructions included PART # DESCRIPTION 1021-0007 For 01-11 Twin Cam (except 11 Softail and 08-11 Touring models) REPLACEMENT COMPONENT FOR TCFI INJECTION TUNERS 1022-0008 Repl. Bosch brand WEGO II oxygen sensor (sold each) PART # DESCRIPTION 1020-2033 For 01-07 Big Twin and 07 XL models w/ 36-pin connector PART # DESCRIPTION 2101-0075 USB interface kit FI-TO-CARBURETOR CONVERSION KIT •Allows most Big Twin and XL models with Delphi EFI to be converted to a carb fuel system •Uses existing wiring harness with no modifications needed •All functions of the turn signal/security module continue to function normally •Includes required software and detailed instructions NOTE: Requires the separate purchase of USB interface PART #2101-0075. NOTE: Requires the separate purchase of a Pingel fuel injection-to-carb tank fitting kit PART #0705-0031. •Easy plug-in installation and setup, with no splicing, cutting, crimping or bulky interconnections •Compact size: 10 cm x 51 mm x 13 mm (4” x 2” x 0,5”) •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software •Compact size - measures 10 cm x 51 mm x 13 mm (4” x 2” x 0,5”) •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software •Kit includes TCFI plug-in fuel injection controller, USB interface for PC, software, WEGO IID dual-channel wide-band exhaust gas oxygen sensor interface, two Bosch LSU 4.2 wide-band exhaust oxygen sensors and two 18 x 1,5 mm weld nuts for exhaust pipes •See page 438 for replacement weld nuts and socket plugs 1021-0007 1020-2033
RkJQdWJsaXNoZXIy ODQ0NDEw