EVOLUTION BIG TWIN • SHOVELHEAD • PANHEAD KNUCKLEHEAD • FLATHEAD • IRONHEAD XL OldBook 2024-2025 TM
A 1999 FLSTF Fat Boy transformed from stock to stunning is the 2024-2025 Drag Specialties OldBook cover bike. It was designed and built by Shannon Reinhart of EDZ Motorcycle Service & Repair, a one-man motorcycle repair and customizing shop. “The idea behind this bike is ‘less is more,’” said Reinhart. “I looked at the overall bike design and tried to keep it simple – if it didn’t need something, I took it off. I wanted that classic bobber style, a lean, muscular look.” Reinhart stressed that this build really is something you can put together using the Drag Specialties OldBook. “The focus when working with Drag Specialties is using what is available in the catalog,” Reinhart said. “After the initial discussion I had about undertaking the build, I opened up the book, and just started to make a list of what I thought would result in a neat final bike.” Reinhart said it is typical the Drag team will give some direction or suggest certain parts get used in a build. “But when I submitted my initial parts list suggestion, they said ‘Hey, this should turn out great! You made our job a lot easier,’” laughed Reinhart. “They really didn’t change anything I suggested as far as vendor or product choices.” Parts list approved, the work began. “It really only took a couple of months to complete it,” Reinhart said. “The original deadline was for September, and that got moved back to August, so there was a little added pressure. But it worked out OK.” The front end is raked out using a set of Arlen Ness triple trees, with a Drag Specialties headlight nacelle kit to keep it clean and simple. “I put the headlight nacelle on as way to incorporate the front turn signals into the design for a strong, simple-looking front end.” The rear of the bike features a Russ Wernimont custom fender for an abbreviated, hot-rod look. “The rear has a custom-mount license plate frame with all the lighting incorporated into it – again, to Builder: Shannon Reinhart EDZ Motorcycle Service & Repair Paint: Nathan Bowers Paint Studio LLC ON THE COVER
dragspecialties.eu | #SINCE1968 partseurope.eu keep it simple and tidy,” Reinhart said. The motor is an 80” Evolution Big Twin with the stock bore/stroke, enhanced with classic upgrades from S&S Cycle: a new intake manifold, a Super E carburetor, and a complete air cleaner kit. The bike’s soundtrack comes from a 2-into-1 exhaust system from Bassani. The seat was the one area that required a midbuild change of plan. “I originally was going to go with a frame-mounted seat,” Reinhart said. “But the rear fender kit eliminated the stock fender struts for a tighter look. That moved the fender in closer on the frame so a stock-style seat wouldn’t fit any more. I switched the design to use a springstyle solo seat. And it turned out pretty good!” A small but important detail some builders overlook is the engine hardware. Reinhart swapped out all the stock fasteners for quality 12-point hardware from the OldBook. “So many people put a lot of effort into the motor finishes and nice paint, then keep the stock fasteners. They often start to corrode pretty quickly. Quality hardware – like the Feuling 12-point bolt kits - are a great upgrade to any build.” The paint is a beautiful silver leaf PPG Brandywine over black and clearcoat and the Drag Specialties logo is silver leaf with orange pinstripe. And the 3” primary drive belt has a hand-painted Drag Specialties logo. All this cool custom paint work was laid down at Nathan Bowers Paint Studio in Decatur, Indiana. And it is a runner. “I rode the bike from Sturgis to Rapid City for the final delivery,” Reinhart said. “It ran a steady 75 mph down the interstate no problem.” “This build was a lot of fun,” Reinhart said. “I wanted to design and build a bike that anybody, with time and effort, could make.”
4 14. Tanks & Oil Filters. . . . . . . . . . . . . . . . . . . 832-868 15.Dashes&Gauges. .................. 869-896 16. Frames & Suspension.. . . . . . . . . . . . . . . . 897-945 17.Fenders........................... 946-964 18. Footrests & Floorboards. . . . . . . . . . . . . . 965-1013 19. Wheels & Axles.. . . . . . . . . . . . . . . . . . . 1014-1027 20. Covers, Locks & General.. . . . . . . . . . . . 1028-1069 OEM Cross Reference.. . . . . . . . . . . . . . . . . 1070-1088 VINGuide.......................... 1089-1092 Drag Specialties Quick Reference Chart.. . . . 1093-1094 Index............................. 1095-1128 Conversion Chart & European Certifications. . . . . . . . . . . . . . . . . 1129-1130 1. Windshields & Fairings.. . . . . . . . . . . . . . . . . . 6-41 2. Saddlebags & Luggage.. . . . . . . . . . . . . . . . 42-120 3. Seats & Sissy Bars.. . . . . . . . . . . . . . . . . . 121-201 4.Exhaust. ......................... 202-248 5. Fuel/Air Systems. . . . . . . . . . . . . . . . . . . . 249-282 6.Engine........................... 283-355 7. Transmission, Clutch Line & Driveline.. . . . . 356-433 8.Gaskets&Seals. ................... 434-459 9.Electrical.......................... 460-537 10. Lighting & License Plates. . . . . . . . . . . . . . 538-632 11. Handlebars, Controls & Mirrors. . . . . . . . . . 633-749 12.Cables........................... 750-780 13. Brakes & Brake Lines. . . . . . . . . . . . . . . . . 781-831 OldBook 20242-20253 TM Please Note: All Evolution Sportsters are in the 2022 FatBook™. All Evolution Big Twins are in THIS catalog. are in the 2024 FatBook
5 IMPORTANT INFORMATION RELATING TO MANUFACTURER’S WARRANTY, EMISSION CONTROL REGULATION AND NOISE REGULATION INFORMATION: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. timing, carburetor, fuel injection/controller settings, etc., and is not caused by defective manufacturing. See the Tires, Tools and Chemicals catalog for products that will help prevent and remove blueing. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal/EU laws. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.
6 WINDSHIELDS & FAIRINGS Windshields......................... 7-27 Fairings........................... 28-35 Trims, Accents, Deflectors.. . . . . . . . . . . . . . 36-38 Fairing Brackets/Windshield Fasteners.. . . . . . . . 38 Fairing Bags, Pouches & NavBags. . . . . . . . . 39-41
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 7 MEMPHIS SLIM •Slimmed-down version of Memphis Fats is 45,5 cm (18”) wide •Available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” clear, “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Available in 38 cm and 43 cm (15” and 17”) heights •Fits standard headlight size 14,5 cm – 18 cm (5 3/4” – 7”) •Made of Lucite® for excellent optics and durability •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •Mounting kit must be purchased separately; see pages 12-13 •Optional Lowers available for additional windshield coverage; see page 10 PART # DESCRIPTION SUG. RETAIL FOR 14,6 CM - 17,8 CM (5 3/4”-7”) HEADLIGHT CUTOUTS 38 CM (15”) TALL MEM4110 Clear MEM4119 Solar 43 CM (17”) TALL MEM4210 Clear MEM4219 Solar FOR 17,8 CM (7”) HEADLIGHT CUTOUTS 38 CM (15”) TALL 2311-0112 “Night Shades” clear 2311-0113 “Night Shades” dark black smoke 2311-0114 “Night Shades” black smoke 43 CM (17”) TALL 2311-0115 “Night Shades” clear 2311-0116 “Night Shades” black smoke PART # DESCRIPTION SUG. RETAIL FOR 22,9 CM (9”) HEADLIGHT CUTOUTS 38 CM (15”) TALL MEM4120 Clear MEM4129 Solar 2313-0317 “Night Shades” clear 2313-0318 “Night Shades” dark black smoke 2313-0319 “Night Shades” black smoke 43 CM (17”) TALL MEM4220 Clear MEM4229 Dark black smoke 2313-0320 “Night Shades” clear 2313-0321 “Night Shades” black smoke MEM4110 2313-0318 MEM4219 2311-0113 MEM4229 2311-0115
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 8 MEMPHIS FATS •Features traditional American styling available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” clear, “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Made from Lucite® for excellent optics and durability •56 cm W (22”) with five standard heights to choose from •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •For standard headlight size 14,5 cm – 18 cm (5 3/4” – 7”) MEMPHIS FATS WITH BIG HEADLIGHT CUTOUT •Features a 24 cm (9,5”) cutout with a custom shape that is designed for a perfect fit on the large nacelle headlights made by Arlen Ness, Rick Doss and others •Popular American styling available in a clear option •56 cm (22”) W with three standard heights •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 12-13 •Optional Lowers available for additional windshield coverage, see page 10 •No-Tool detachable Trigger-Lock mounting kits must be purchased separately; see pages 12-13 •Optional Lowers available for additional coverage; see page 10 PART # DESCRIPTION 33 CM (13”) TALL MEM31101 Clear MEM31191 Solar 38 CM (15”) TALL 2313-00641 Clear 2313-00721 Solar 43 CM (17”) TALL MEM32101 Clear MEM32191 Solar 48,5 CM (19”) TALL MEM33101 Clear MEM33191 Solar 53,5 CM (21”) TALL MEM3410 Clear MEM3419 Solar FOR 17,8 CM (7”) HEADLIGHT CUTOUTS 33 CM (13”) TALL 2311-0100 “Night Shades” clear 2311-0101 “Night Shades” dark black smoke 2311-0102 “Night Shades” black smoke PART # DESCRIPTION 38 CM (15”) TALL 2311-0103 “Night Shades” clear 2311-0104 “Night Shades” dark black smoke 2311-0105 “Night Shades” black smoke 43 CM (17”) TALL 2311-0106 “Night Shades” clear 2311-0107 “Night Shades” black smoke 48,5 CM (19”) TALL 2311-0108 “Night Shades” clear 2311-0109 “Night Shades” black smoke 53,5 CM (21”) TALL 2311-0110 “Night Shades” clear 2311-0111 “Night Shades” black smoke FOR 22,9 CM (9”) HEADLIGHT CUTOUTS 33 CM (13”) TALL 2313-00031 Clear 2313-0305 “Night Shades” clear 2313-0306 “Night Shades” dark black smoke 2313-0307 “Night Shades” black smoke PART # DESCRIPTION 38 CM (15”) TALL 2313-00731 Clear 2313-00811 Solar 2313-0308 “Night Shades” clear 2313-0309 “Night Shades” dark black smoke 2313-0310 “Night Shades” black smoke 43 CM (17”) TALL MEM36291 Clear 2313-0311 “Night Shades” clear 2313-0312 “Night Shades” black smoke 48,5 CM (19”) TALL MEM37101 Clear 2313-0313 “Night Shades” clear 2313-0314 “Night Shades” black smoke 53,5 CM (21”) TALL MEM3819 Solar 2313-0315 “Night Shades” clear 2313-0316 “Night Shades” black smoke 1 ABE approved. PART # DESCRIPTION 38 CM (15”) TALL 2313-0049 Clear PART # DESCRIPTION 43 CM (17”) TALL 2313-0054 Clear PART # DESCRIPTION 48,5 CM (19”) TALL 2313-0059 Clear See chart for details MEM3110 MEM3319 2311-0104 2311-0108 2313-0310
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 9 MEMPHIS FATS/SLIM FOR ROAD KING •Features traditional American styling available in clear, and solar (a light tint with 72% visible light transmission) •Made from Lucite® for excellent optics and durability •Memphis Slim and Fats have a 23 cm (9”) cutout and fit 94-98 FLHR/FLHRI/ FLHRCI Road King applications only; see MOUNTING KIT chart for details •Memphis Slim are 45,5 cm (18”) W and available in 38 cm or 43 cm (15” or 17”) heights •Memphis Fats are 56 cm (22”) W with five standard heights to choose from •Windshield straps are available in polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws or the “Night Shades” black version which is a gradient black windshield with black E-coated stainless steel straps, fittings and hardware for a black-on-black sinister look •No-Tool detachable Trigger-Lock mounting kit must be ordered separately; available in polished or “Night Shades” black, see chart below MEMPHIS FATS 56 CM (22”) WIDE; 23 CM (9”) HEADLIGHT CUTOUT) PART # DESCRIPTION 33 CM (13”) 2313-00031 Clear 38 CM (15”) 2313-00731 Clear 2313-00811 Solar PART # DESCRIPTION 43 CM (17”) MEM36201 Clear MEM36291 Solar 48,5 CM (19”) MEM37101 Clear MEM37191 Solar PART # DESCRIPTION 53,5 CM (21”) MEM3810 Clear MEM3819 Solar 1 ABE approved. MEMPHIS SLIM (45,5 CM (18”) WIDE; 23 CM (9”) HEADLIGHT CUTOUT) PART # DESCRIPTION 38 CM (15”) MEM41201 Clear PART # DESCRIPTION 38 CM (15”) (CONT) MEM41291 Solar PART # DESCRIPTION 43 CM (17”) MEM42201 Clear PART # DESCRIPTION 43 CM (17”) (CONT) MEM42291 Solar 1 ABE approved. MOUNTING KITS PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI 2320-00481 Polished PART # DESCRIPTION FOR 94-98 FLHR/FLHRI/FLHRCI (CONT) 2320-00491 “Night Shades” black 1 ABE approved. See chart for details Once installed, Trigger-lock mounts let you remove or change Memphis Shades Fats or Slims windshields in a moment’s time MEM3620 MEM3629 MEM4120 MEM4129
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 10 SIDE WINGS •Expand comfort pocket, channeling air outward while “cleaning” the flow •Adjust to suit rider preference •Can be installed/removed with windshield intact – Santoprene pads grip the windshield but do not mar the surface •”Ghost” shade – a neutral tint with 85% light transmission barely noticeable, with just enough tint to make the edges disappear •Fit Road King, Fat Boy, Heritage and Memphis Fats windshield using injection-molded glass-filled nylon clamps in place of the billet aluminum clamps (can be mounted along with Hot Wing) HOT WING •Boost airstream upward – Venturi action speeds up the airstream while smoothing the flow – without buffeting •Allows the use of a shorter shield; now you can easily look over your shield •Made with “Ghost” shade – a neutral tint with 85% light transmission; barely noticeable, with just enough tint to make the edges disappear •Uses lightweight, economical injection-molded glass-filled nylon clamps •Fits Memphis Fats windshields or similar windshields that measure 3 mm or 4,5 mm thick (includes inserts for both sizes) CUSTOM LOWERS •Provide additional protection by extending your coverage downward •Shield rider from rain, wind and noise coming up from the road •Made of the same high-quality materials as Memphis Shades windshields with matching tints •Available in black, clear and solar (a light tint with 72% visible light transmission) •Must purchase Lowers mounting kits; see pages 12-13 •May require turn signal relocation •Measure 20,5 cm H x 14 cm W (8” H x 5 – 5 1/2” W) •Sold in pairs PART # DESCRIPTION 2350-0200 Side Wings PART # DESCRIPTION 2350-0199 Memphis Hot Wing PART # DESCRIPTION MEP5810 Clear PART # DESCRIPTION MEP5811 Black PART # DESCRIPTION MEP5819 Solar Clear Black Solar
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 11 RIO GRANDE •The most coverage of any windshield in the Sportshield family •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 53,5 cm W x 48,5 cm H (21” W x 19” H) above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 12-13 SPEED DEMON •Offers more protection with a sporty look •Features a similar shape and style to the popular handlebar mount “Demon” shield, but with the benefits of easier installation and faster removal due to the exclusive Sportshield mounting system •Measures 53,5 cm (21”) W and 45,5 cm (18”) H above the headlight; fits a 18 cm or 23 cm (7” or 9”) headlight cutout •Made of Lucite® for excellent optics and durability •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 12-13 PART # DESCRIPTION MEP5319 Solar PART # DESCRIPTION MEP5119 Solar PART # DESCRIPTION 33 CM (13”) TALL 2320-0121 Solar 38 CM (15”) TALL 2320-0123 Solar PART # DESCRIPTION 43 CM (17”) TALL MEP5219 Solar 48,5 CM (19”) TALL MEP5229 Solar PART # DESCRIPTION MEP5019 Solar PART # DESCRIPTION 2313-0089 Solar DEL RIO •Good torso protection in a sleek windshield design •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 48,5 cm W x 38 cm H (19” W x 15” H) above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 12-13 EL PASO •Smooth design complements the lines of your machine •Tapered windshield lower is ideal for handlebar-mounted turn signals •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 51 cm (20” W); available in 33 cm (13”), 38 cm (15”), 43 cm (17”) or 48,5 cm (19”) H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 12-13 DEL REY •Small, sleek design that offers good protection in a minimalist package •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) • Measures approximately 38 cm W x 33 cm H (15” W x 13” H) above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 10 •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 12-13 MEP5219
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 12 NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS •Gone are the days of fumbling with tools to remove your windshield •The revolutionary No-Tool Trigger-Lock hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools •A pair of latches lock the windshield down until the spring loaded “trigger locks” are intentionally disengaged, allowing the rider to remove the windshield •Hardware is fully adjustable to achieve just the right windshield angle •Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors •Kits are custom-fit to each style of bike for a truly no-hassle installation PLATES-ONLY KITS •Allow changing from Fats/Slim to Sportshield or from Sportshield to Fats/Slim without purchasing the entire mounting hardware INDEPENDENT LOWERS KITS •Mounts Memphis Shades Lowers to most motorcycles •Each kit contains two fork clamp/m ounting assemblies and all necessary hardware to mount Lowers plastic •Kits can be used with select Memphis Shades windshields and several OEM windshields •Sold in pairs; must order Lowers plastic separately Whether your bike has conventional forks (tins) or a Springer front end, once installed, Trigger-Lock mounts let you remove or change Memphis Shades Fats/Slims/Sportshield windshields in a moment’s time. 2320-0013 MEM9884
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 13 SPORTSHIELDS DESCRIPTION SPORTSHIELDS TRIGGER-LOCK MOUNT KITS POLISHED BLACK SPORTSHIELD LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 90-99 FLSTF/F LSTFB/FLS (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 90-99 FLSTF (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 93-96 FLSTN (w/o OEM light bar) 2320-00203 2320-00713 MEM9891 For 93-96 FLSTN (w/ OEM light bar) 2320-00223 2320-00723 MEM9891 For 88-99 FLSTSC/F XSTS (w/ light bar)1, 2 2320-00283 2320-00733 2320-0001 For 88-99 FLSTSC/F XSTS (w/o light bar)1 2320-00283 2320-00733 2320-0001 For 91-98 FXD, FXDL 2320-00123 2320-00693 MEM9884 For 93-98 FXDWG 2320-00143 2320-00703 MEM9888 For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-00143 2320-00703 MEM9888 For 82-94, 99-00 FXR 2320-00123 2320-00693 MEM9884 For 73-85 FX/FXE/FXS 2320-00123 2320-00693 MEM9884 For 73-85 XL 2320-00123 2320-00693 MEM9884 For other narrow forks 8 1/2” to 9” (with 35 mm-42 mm forks) 2320-00123 2320-00693 - For other wide forks 11 1/2” to 12” (with 35 mm-42 mm forks) 2320-00143 2320-00703 - 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. 3 ABE approved. MEMPHIS FATS AND SLIM DESCRIPTION FATS/SLIM TRIGGER-LOCK MOUNT KITS POLISHED BLACK FATS/SLIM LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 90-99 FLSTF/F LSTFB/FLS (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 90-99 FLSTF/F LSTFB/FLS (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 93-96 (w/o OEM light bar) 2320-00893 2320-00913 MEM9891 For 93-96 (w/ OEM light bar) 2320-00213 2320-00443 MEM9891 For 88-99 FLSTSC/F XSTS (w/ light bar)1, 2 2320-00273 2320-00813 2320-0001 For 88-99 FLSTSC/F XSTS (w/o light bar)1 2320-00273 2320-00813 2320-0001 For 80-86 FXWG, 84-99 FXST 2320-00133 2320-00783 MEM9888 For 91-98 FXD, FXDL 2320-00113 2320-00773 MEM9884 For 93-98 FXDWG 2320-00133 2320-00783 MEM9888 For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-00133 2320-00783 MEM9888 For 82-94, 99-00 FXR 2320-00113 2320-00773 MEM9884 For 73-85 FX/FXE/FXS 2320-00113 2320-00773 MEM9884 For 73-85 XL 2320-00113 2320-00773 MEM9884 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. 3 ABE approved. NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS CUSTOM MOUNTING FORK AND HANDLEBAR CLAMP ASSEMBLIES •Sold in pairs DESCRIPTION PART # 1 1/4” handlebar clamp assemblies w/ 3/8” rod holders MEM9950 2320-0071 2320-0091
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 14 HELL CAT •Sculpted full-body shape •Measures 51 cm W (20”) x approximately 45,5 cm H (18”) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamp that fits 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. DEMON •Measures 53,5 cm W x 45,5 cm H (21” W x 18” H) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in clear or solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 25 mm and 22 mm (1” and 7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. CLASSIC DEUCE •Smooth shape surrounds headlight to become part of the motorcycle •Measures approximately 48,5 cm W x 47 cm H (19 1/2” W x 18 1/2” H) above headlight •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Solid two-point handlebar mounting hardware fits many custom and stock applications •Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band) and CNC-machined aluminum rake plates, fittings and stainless steel socket head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. 32 MM (1 1/4”) HANDLEBAR CLAMPS •Allow you to mount a Memphis Shades Classic Deuce, Hell Cat, Demon or The Shooter to a bike with 32 mm (1 1/4”) handlebars •Sold in pairs PART # DESCRIPTION MEM1719 Solar PART # DESCRIPTION MEM2210 Clear PART # DESCRIPTION MEM2219 Solar PART # DESCRIPTION MEM1619 Solar PART # DESCRIPTION MEM2129 Solar PART # DESCRIPTION MEM9950 32 mm (1 1/4”) handlebar clamps (pr.) THE SHOOTER •Looks great on today’s wide-body motorcycles •Measures 48,5 cm W (19”) x approximately 35,5 cm H (14”) above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 25 mm (1”) and 22 mm (7/8”) handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 32 mm (1 1/4”) handlebar clamps sold separately (PART #MEM9950) NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. Clear Solar
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 15 REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS continued on next page. DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 94-98 FLHR W/ OEM WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00101 2310-00191 2310-00281 2310-0037 Solar 2310-00181 2310-00271 2310-00361 2310-0045 1 ABE approved. DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 84, 99-00 FXR, 91-98 FXD W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00821 2310-00911 2310-01001 - Solar - - 2310-01081 - REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS •Now riders can replace their OEM windshield with the size and color of their choice •Available in clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability •Available for six models in up to four different heights – pick a size that’s right for you •Perfect fit with OEM hardware •Holes are not drilled but rather machined to accept snap-in nylon inserts that prevent stress fractures and star cracks commonly seen around holes – an exclusive feature of Memphis Shades replacement plastic VERTICAL STRAPS There is a right and left strap, although they measure the same. HORIZONTAL STRAPS The windshield should have one of the two straps illustrated. Straps shown for reference only. NOTE: Measurements are approximate and measured center to center of holes on the outside of windshield. Due to variations in OEM mounting hardware, these windshields may not fit all models; be sure to check measurements before ordering.
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 16 REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS (CONT) DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 86-98 FXWG, 84-99 FXST, 93-98 FXDWG W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-01091 2310-01181 2310-01271 - Solar 2310-01171 2310-01261 - - 1 ABE approved. DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 86-98 FXWG, 84-99 FXST, FXSTC, FXSTB, 93-98 FXDWG W/ OEM ACCESSORY QUICK-RELEASE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear - - 2310-0510 - Solar - - 2310-0518 - DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 93-99 FLSTS, FXSTS W/ OEM ACCESSORY DETACHABLE COMPACT WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-01361 2310-01451 2310-01541 - Solar 2310-01441 2310-01531 2310-01621 - 1 ABE approved. DESCRIPTION 38 CM (15”) 43 CM (17”) 48,5 CM (19”) 53,5 CM (21”) FOR 90-99 FLSTF, 90-99 FLSTC, 93-96 FLSTN W/ OEM ACCESSORY DETACHABLE KING SIZE WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-00461 2310-00551 2310-00641 2310-0073 Solar 2310-00541 2310-00631 2310-00721 2310-0081 1 ABE approved.
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 17 REPLACEMENT WINDSHIELDS FOR BAGGERS •Available in gradient black as well as clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability SPOILER WINDSHIELDS FOR OEM FAIRINGS •Designed to be looked over, the spoiler windshield diffuses the airstream, effectively slowing the flow without buffeting •Made of aircraft-grade Lucite® for excellent optics and durability •Uses OEM hardware for a perfect fit DESCRIPTION 12,5 CM (5”) 18 CM (7”) 23 CM (9”) 30,5 CM (12”) 38 CM (15”) FOR 96-98 FLHT Gradient black 2310-00031, 2 - - - - Solar 2310-00041, 2 2310-02542 - - MEP8139 Clear - 2310-02552 MEP81102 MEP8120 MEP8130 FOR 86-95 FLHT/F LHTC Gradient black 2310-00011, 2 - - - - Solar 2310-00021, 2 2310-02622 - - - Clear - 2310-02632 MEP80102 MEP8020 MEP8030 1 All 12,5 cm (5”) shields are solid, not gradient. 2 ABE approved. COLOR 76 MM (3”) 12,5 CM (5”) 14 CM (5,5”) 16,5 CM (6,5”) 21,5 CM (8,5”) 23 CM (9”) 25,5 CM (10”) FOR 98 FLTR Smoke - - 2310-05941 - 2310-06061 - 2310-0609 Dark smoke - - 2310-05951 2310-06011 2310-06081 - - Black opaque - - 2310-05961 2310-06021 - - - FOR 96-98 FLHT Smoke 2310-0677 2350-01732 - 2350-01762 - 2350-01792 - Gradient black/ghost 2310-0678 - - - - - - Dark smoke 2310-0679 2310-0664 - 2310-0665 - 2310-0666 - 1 Not recommended for use with metal windshield trim. 2 ABE approved. •Available in multiple heights •Use the OEM hardware for a perfect fit •See page 37 for matching deflectors Clear Clear Solar 2310-0003 12,5 cm (5”) Solid windshield 2310-0596 2310-0677 2350-0173 2310-0666
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 18 REPLACEMENT PLASTIC FOR MEMPHIS SHADES WINDSHIELDS •Replacement plastic is a low-cost alternative to replace worn or damaged Memphis Shades •Available in clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability •Available for standard headlight size of 14,5 cm – 18 cm and 23 cm (53/4” – 7” and 9”) headlights •Replacement plastic does not include any hardware •Sportshield replacement plastic has same part numbers as found on page 11 MEMPHIS FATS AND SLIM WINDSHIELD STRAPS •The same high-quality straps that come with the Fats or Slim series windshields •Available in polished stainless steel or a custom black E-coated stainless steel •All fasteners required to mount the straps to the windshield are included BATWING FAIRING STORAGE BAG •Constructed of 600-denier “tool bag” material and lined with faux Sherpa to ensure a mar-free surface •Safe way to carry or store Memphis Shades Batwing fairing •Convenient handle to carry windshield/ fairing or hang out of harm’s way •Will hold one Memphis Shades Batwing fairing with mounting plates and windshield installed WINDSHIELD/FAIRING STORAGE BAG •Constructed of 600-denier “tool bag” material and lined with faux Sherpa to ensure a mar-free surface •Safe way to carry or store Memphis Shades windshields or small fairings •Convenient handle to carry windshield/ fairing or hang out of harm’s way •Will hold one Memphis Fats/Slim, Sportshield or fairing (Bullet, Gauntlet, Cafe) with or without mounting plates installed •Also fits most OEM HD windshields, including Road King windshield PART # DESCRIPTION MEMPHIS FATS FOR 14,5 CM – 18 CM (5 3/4” – 7”) HEADLIGHTS 33 CM (13”) REPLACEMENT PLASTIC MEP3110 Clear 38 CM (15”) REPLACEMENT PLASTIC 2313-0082 Clear 43 CM (17”) REPLACEMENT PLASTIC MEP3210 Clear MEP3219 Solar 48,5 CM (19”) REPLACEMENT PLASTIC MEP3310 Clear 53,5 CM (21”) REPLACEMENT PLASTIC MEP3410 Clear MEP3419 Solar PART # DESCRIPTION MEMPHIS SLIM FOR 14,5 CM – 18 CM (5 3/4” – 7”) HEADLIGHTS 38 CM (15”) REPLACEMENT PLASTIC MEP4110 Clear 43 CM (17”) REPLACEMENT PLASTIC MEP4219 Solar PART # DESCRIPTION FOR MEMPHIS FATS (11 MOUNTING BOLTS) 2321-0094 Polished stainless steel 2321-0096 Black E-coated stainless steel PART # DESCRIPTION FOR MEMPHIS SLIMS (9 MOUNTING BOLTS) 2321-0095 Polished stainless steel PART # DESCRIPTION 3508-0041 Batwing fairing bag PART # DESCRIPTION 3508-0042 Windshield bag 2321-0096 2321-0095 MEP3419 MEP3110
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 19 FLARE™ WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Lexan® polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability •All are predrilled for easy mounting using stock windshield hardware NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 96-98 FLHT, FLHTC MODELS 2310-0225 29 cm (11,5”) tint 2310-0226 29 cm (11,5”) clear 2310-0633 29 cm (11,5”) dark smoke 2310-0715 26,5 cm (10,5”) clear PART # DESCRIPTION FOR 96-98 FLHT, FLHTC MODELS (CONT) 2310-0716 26,5 cm (10,5”) tint 2310-0717 26,5 cm (10,5”) dark smoke 2310-0213 16,5 cm (6,5”) black 2310-0222 89 mm (3,5”) tint PART # DESCRIPTION FOR 98 FLTR MODELS 2310-0482 35,5 cm (14”) dark smoke 2310-0481 35,5 cm (14”) tint 1 ABE approved. 2310-0481 35,5 cm (14”) tint 2310-0482 35,5 cm (14”) dark smoke 29 cm (11,5”) 89 mm (3,5”)
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 20 30,5 CM (12”) FLARE™ WINDSHIELDS •Pro Touring style available •The Pro Touring Flare™ is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town •The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management •Made of Lexan® polycarbonate with FMR hard coating on both sides of the shield for unmatched durability ICE KOLOR FLARE™ WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop •All are predrilled for easy mounting using stock windshield hardware •Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. •All are predrilled for easy mounting using stock windshield hardware The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 98 FLTR MODELS 2310-0748 Tint PART # DESCRIPTION FOR 98 FLTR MODELS (CONT) 2310-0749 Dark smoke PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/FLHX AND H-D FL TRIKE MODELS 2310-0733 16,5 cm (6.5”) orange 2310-0734 16,5 cm (6.5”) yellow 2310-0735 16,5 cm (6.5”) red 2310-0736 16,5 cm (6.5”) green 2310-0737 16,5 cm (6.5”) blue PART # DESCRIPTION FOR 96-98 FLHT/FLHTC/F LHX AND H-D FL TRIKE MODELS (CONT) 2310-0756 89 mm (3.5”) orange 2310-0758 89 mm (3.5”) red 2310-0759 89 mm (3.5”) green 2310-0760 89 mm (3.5”) blue PART # DESCRIPTION FOR 98 FLTR MODELS 2310-0718 20,5 cm (8”) orange 2310-0719 20,5 cm (8”) yellow 2310-0720 20,5 cm (8”) red 2310-0721 20,5 cm (8”) green 2310-0722 20,5 cm (8”) blue 2310-0748 2310-0749 2310-0733 2310-0735 2310-0737 2310-0759 2310-0719 2310-0721
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 21 23 CM (9”) FLARE WINDSHIELDS •All of the great features of the original Flare windshield now available in versions for the increasingly popular early FXRP/FXRT models PART # DESCRIPTION FOR 84-92 FXRP 2310-0635 Dark smoke 2310-0636 Black PART # DESCRIPTION FOR 84-92 FXRT 2310-0704 Dark smoke PART # DESCRIPTION FOR 83-93 FXRP SPORT 2310-0714 Black PART # DESCRIPTION FOR 84-92 FXRP MODELS 2310-0771 23 cm (9”) orange PART # DESCRIPTION FOR 84-92 FXRP MODELS (CONT) 2310-0772 23 cm (9”) yellow PART # DESCRIPTION FOR 84-92 FXRP MODELS (CONT) 2310-0773 23 cm (9”) green ICE KOLOR FLARE™ WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop •All are predrilled for easy mounting using stock windshield hardware •Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0635 2310-0636 2310-0772 2310-0773 2310-0771
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 22 FLARE™ BILLBOARD WINDSHIELDS •Modeled after the original Flare™ windshield for Baggers, now almost every rider can get all of the same performance and style with bolt-on ease •With patented Klock Werks “hips” on the side and a flip at the top, shields have been wind tunnel designed and tested to produce the same amount of additional down force as original •Real world testing and computer simulation also produced multiple heights that will work for most riders; heights listed are measured from headlight opening to top of shield •All are predrilled for easy mounting using stock windshield mounting kits •For the following applications “Detachable” refers to the old-style H-D grommet/hinge style mechanism FOR 94-98 FLHR WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 49 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) 2310-0709 Dark smoke PART # DESCRIPTION 41,5 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) 2310-0387 Clear 2310-0388 Tint PART # DESCRIPTION 41,5 CM TALL X 67,5 CM WIDE (16 3/8” X 26 5/8”) (CONT) 2310-0708 Dark smoke FOR 90-99 FLSTF, 86-99 FLSTC WITH OEM ACCESSORY DETACHABLE KING-SIZE WINDSHIELD PART # DESCRIPTION 51 CM TALL X 70 CM WIDE (20” x 26 3/8”) 2310-0711 Dark smoke PART # DESCRIPTION 43 CM TALL x 70 CM WIDE (17” x 26 3/8”) 2310-0389 Clear PART # DESCRIPTION 43 CM TALL x 70 CM WIDE (17” x 26 3/8”) (CONT) 2310-0710 Dark smoke NOTE: All measurements given are approximate. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0389 2310-0388 2310-0708
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. See FATBOOK For Late Model Applications 23 REPLACEMENT HARLEYDAVIDSON WINDSHIELDS •The 130 series windshields are exact replacements for H-D Touring models •Available in clear, tint and dark smoke finishes in several different sizes •Made of tough 5 mm (3/16”) aircraft-quality Lucite® acrylic for optically perfect vision PART # DESCRIPTION FOR 96-98 FLHT/FLHTC S13410 25,5 cm (10”) clear S13413 33 cm (13”) clear S13416 40,5 cm (16”) clear S1356 15 cm (6”) tint S1358 20,5 cm (8”) tint S13510 25,5 cm (10”) tint S13513 33 cm (13”) tint S13516 40,5 cm (16”) tint 135-6DS 15 cm (6”) dark smoke PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 135-8DS 20,5 cm (8”) dark smoke 135-10DS 25,5 cm (10”) dark smoke FOR 86-95 FLHT/FLHTC 13010C 25,5 cm (10”) clear 13013C 33 cm (13”) clear 13016C 40,5 cm (16”) clear 13110T 25,5 cm (10”) tint 13113T 33 cm (13”) tint 13116T 40,5 cm (16”) tint PART # DESCRIPTION FOR 84-95 FLT 13216C 40,5 cm (16”) clear 13219C 48,5 cm (19”) clear 13316T 40,5 cm (16”) tint 13319T 48,5 cm (19”) tint FOR 98 FLTR S-138-18 45,5 cm (18”) clear S-139-12 30,5 cm (12”) tint 96-98 FLHT/FLHTC Series 86-95 FLHT/FLHTC Series 84-95 FLT Series 98 FLTR Series S13413 135-10DS
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCH LINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 See FATBOOK For Late Model Applications 24 SS-30 CLASSIC WINDSHIELDS •Complement your rider’s style with this sleek design •Versatile new quick release mounting systems fit many different bikes with standard fork tubes or oversized fork tubes •All styles are 58,5 cm (23”) wide PART # DESCRIPTION 43 CM H X 58,5 CM W (17” X 23”) CLEAR WINDSHIELD W/ CHROME HARDWARE 2313-0177 W/ standard fork mounting system (28-41 mm fork tubes w/ 23 cm-26,5 cm (9”-10,5”) fork span) 56 CM H X 58,5 CM W (22” X 23”) CLEAR WINDSHIELD W/ CHROME HARDWARE 2313-0176 W/ standard fork mounting system (28-41 mm fork tubes w/ 23 cm-26,5 cm (9”-10,5”) fork span) 2313-0191 W/ Oversized fork mounting system (42-58 mm fork tubes w/ 28 cm-32 cm (11”-12,5”) fork span) 2313-0193 W/ Wide Glide fork mounting system (28-41 mm fork tubes w/ 28 cm-32 cm (11”-12,5”) fork span) 56 CM H X 58,5 CM W (22” X 23”) CLEAR WINDSHIELD W/ BLACK HARDWARE 2313-0217 W/ Oversized fork mounting system (42-58 mm fork tubes w/ 28 cm-32 cm (11”-12,5”) fork span) SS-20 STEALTH •Provides excellent protection with an eye-catching look •Features flowing, sculptured curves and anodized aluminum handlebar clamps that fit 25,4 mm (1”) handlebars •Available in clear and dark smoke PART # DESCRIPTION 2313-0092 Clear 2313-0093 Dark smoke PART # DESCRIPTION S-114-C Optional 32 mm (1 1/4”) handlebar hardware kit 2313-0093 2313-0176 2313-0217
www.bigtwin-motorcycles.deRkJQdWJsaXNoZXIy ODQ0NDEw