RISERS 17 Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous 1553 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM KRAUS, ISOLATED RISERS Black anodized aluminum. Available in a Straight and Kickback (pullback) style with 25mm (1") or 28mm (1-1/4") diameter at the riser clamp area in 5" (127mm = without legs), 8" (200mm) or 10" (250mm) rise. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Black anodized CNC machined billet aluminum - Bottom clamp has an opening to accommodate hidden wiring - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: If you purchase the 984604 RG Billet Gauge Bezel or 984618 Softail Digital Gauge Bezel with your risers, then you will need to add the mount separately (either 984606 Kraus T-Bar Clamp or 984620 Isolated Top Gauge Mount and the 984605 3" Extension for maximum adjustability). Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: The 5" version for the Kickback option (= Kickback risers without legs) is NOT compatible with the Kraus Raptor or T-Rex Pullback Plates on bagger applications. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall. Straight With 1" (25mm) or 1-1/8" (28mm) clamping area. Risers are black anodized billet aluminum. 1" 1-1/8" 984584 984585 8" (200mm) rise 984588 984589 10" (250mm) rise Kickback With 1" (25mm) or 1-1/8" (28mm) clamping area. Risers are black anodized billet aluminum. 1" 1-1/8" 993476 993499 5" (127mm) rise. Not compatible with Raptor or T-Rex pullback plate) 984586 984587 8" (200mm) rise 984600 984601 10" (250mm) rise Optional isolated riser legs Black anodized aluminum riser legs only. Allows you to install alternative length riser legs since Kraus Straight or Kickback Isolated Risers are a modular construction. 984613 89mm (3.5") long legs 984614 140mm (5.5") long legs 984615 191mm (7.5") long legs 984616 241mm (9.5") long legs KRAUS, PRO-LINE PERCH HALF CLAMPS Used if you plan to run stock 2014-up switch housings with the Kraus FM Fly Moto handlebars. Will also fit 08-13 Touring with early OEM handlebars. Designed and CNC machined billet aluminum to the high Kraus standards to replace the Harley stock half clamps. Keeps a clean look while securing the handlebar master cylinder and clutch control. Note: Small modifications may be needed. Universal for: 08-13 Touring with OEM bars; 14-23 Touring with stock switch housings and Kraus Fly Moto bars 984611 Black anodized aluminum 984611 984584 984589 KRAUS, ISOLATED RISER TOP GAUGE MOUNT Allows you to mount a Kraus Billet Gauge Bezel directly to the top of your Isolated Risers. Mounts directly to the top clamp of the Kraus Isolated Risers. This top plate bezel mount can be installed with the mount pointing 'up' or 'down' for a higher or lower gauge mount position. 984620 Black anodized aluminum 984620 984601 984586 993476 The first step in front end performance
RkJQdWJsaXNoZXIy ODQ0NDEw