Indian 905 15 NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM Speedo Seats & Luggage Frame Suspension Forks Wheels Brake Fenders Gastanks Engine Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil filters Oil & Chemicals Fasteners Miscellaneous Windshields Footpegs LIGHTS - TURN SIGNALS INSERTS, FAIRING, FENDER TURN SIGNALS, RUNNING & MARKER LIGHTS WEDGE, MARKER LIGHTS 12-Volt, single filament. Bulb included. 940331 With red lens, single filament 940330 With amber lens, single filament 940331 940330 CATEYE TURN SIGNAL INSERTS Comes with ECE approved clear lens and halogen bulb. Used to build into a fairing, or any other application where a flat surface is present. Comes with a large nut that secures the (threaded) turn signal on the inside. Dimensions: 6cm overall depth, 75mm lens width, 43mm lens height. Diameter of clamp nut 66mm. 940915 Tinted orange lens Replacement parts 940847 Bulb. 12V 21W halogen 940915 CUSTOM DYNAMICS, LED BOLTZ LED lighted bolts. Use as running lights, turn signals, marker lights or just to light up a dark space, like a top case or similar. 5/8" (16mm) diameter and required a 1/2" (12.7mm) hole for mounting. Comes with 4" (10.2cm) wiring. Note: 922707 is a Amber/White converter required for controlling the LEDs when used as turn signal. This converter can control a maximum of 3 Amber/White LED boltz per side. Black Polished 922706 922705 Amber LEDs 922704 922703 Amber/White LEDs (note) 922702 922701 Red LEDs Optional converter/controller Compatible with 3 wire lights with two power (+) wires (like LED boltz and Dual Color Micro lights) with dual colored LEDs. The individual power wires allow for the light to carry dual-function (i.e. white running light with amber turn signal or red brake light with amber turn signal). This module ensures the turn signal power will override the other run or brake power, turning those functions off when the turn signal is engaged, providing a full contrast amber turn signal. 922707 922702 922704 922703 922701 APOLLO, LED LIGHTS Miniature lights with 2 super bright SMD LEDs and a ECE approved lens. Plastic construction with a black anodized aluminum ring that fits over the body. Dimensions: A1 = 13 mm, A2 = 9 mm, D1 = 22 mm. D2 = 20 mm. The threaded bolt on the rear is M8 x 12mm. Note: Installes in a 8mm mount hole. Alternatively Apollo lights can be flush-installed in a 20mm diameter hole, when the aluminum 'body ring' is removed, so just the lens is visible. Note: An optional steel housing, for more installation options, is separately available as 922198. Turn signals Yellow wire = turn signal, black wire = ground. 922147 Smoke lens Turn signal / position light Yellow wire = turn signal, white wire = position light, black wire = ground. 922148 Smoke lens Taillight/turn signal combo Yellow wire = taillight, red wire = brake light, blue wire = turn signal, black wire = ground. 922149 Smoke lens Taillight Full plastic body. Yellow wire = taillight, red wire = brake light, black wire = ground 943473 Red lens Steel weld-in housing for 'Apollo' lights Optional CNC machined steel housing for all Apollo lights. Outside dimensions: 22mm diameter x 22mm deep. Inside dimensions: 20mm diameter x 21mm deep. Mounting hole diameter 5mm. 922198 Housing only STAR-1MX PRO, LED LIGHTS Small LED lights with ECE approved lens. Especially designed for applications where small light units are needed that must be build-in. Plastic body. Perfect for laminating or gluing into position. Dimensions: 38mm wide x 8mm high x 12mm deep. Note: An optional steel housing, for more installation options, is separately available as 922284. Turn signals ECE approved for front, rear, horizontal and vertical installation. Yellow wire = turn signal, black wire = ground. 922216 Amber lens Turn signal / position light ECE approved for front, horizontal and vertical installation. Yellow wire = turn signal, white wire = position light, black wire = ground. 922220 Smoke lens Taillight/turn signal combo ECE approved for rear, horizontal and vertical installation. Yellow wire = taillight, red wire = brake light, brown wire = turn signal, black wire = ground. 922219 Smoke lens Steel weld-in housing for 'Star-MX1 Pro' lights Optional CNC machined steel housing for all 'StarMX1' lights, allowing additional installation options. Dimensions: 40.8mm wide x 10.8mm high x 15.1mm deep. Mounting hole diameter 5mm. 922284 Housing only 922216 922220 922219 922284 943473 922147 CUSTOM DYNAMICS, AMBER/WHITE LED CONVERTER/CONTROLLER Compatible with 3 wire lights with two power (+) wires (like LED boltz and Dual Color Micro lights) with dual colored LEDs per side. The individual power wires allow for the light to carry dual-function (i.e. white running light with amber turn signal or red brake light with amber turn signal). This module ensures the turn signal power will override the other run or brake power, turning those functions off when the turn signal is engaged, providing a full contrast amber turn signal. 922707 922707
RkJQdWJsaXNoZXIy ODQ0NDEw