198 PRESSOL 599698 599691 599693 599692 599694 599695 PRESSOL, INDUSTRIAL WATER SPRAYER White/transparent polyethylene 1 liter container with an adjustable and closeable brass nozzle. Sprays 0.75cc per stroke. Recommended for use with water. Note: Not suitable for acetone, glycol, ammonia, brake cleaners and acids like formic acid, acetic acid, or chemical products. 599698 1 liter. Dimensions 200mm to 125mm diameter x 285mm high PRESSOL, STANDARD WORKSHOP OILER WITH SPOUT Blue steel container with a 1cc per stroke pumping single action brass pump and an angled 135mm long aluminum spout. An additional flexible and translucent 210mm long (see-through) PVC Superflex spout is included. Pump enable drip feed and comes with 2 ball valves. 599696 250cc. Dimensions: 135mm to 70mm diameter x 110mm high 599697 500cc. Dimensions: 145mm to 85mm diameter x 150mm high PRESSOL, WORKSHOP OILER WITH SPOUT White HDPE (high density polyethylene) container with double-acting brass/zinc pump and an angled aluminum spout. Robust and virtually impact proof. The ball bearing mounted and gravity controlled suction tub enables the container to be almost completely emptied. Pump enables drip feed. With 2 ball valves. Sealing mechanism comes with drip collector pan. Workshop oilers 599691 200cc with 135mm spout. Dimensions: 270mm high x 85mm to 60mm diameter 599692 300cc with 165mm spout. Dimensions: 320mm high x 120mm to 70mm diameter 599693 500cc with 165mm spout. Dimensions: 350mm high x 135mm to 70mm diameter Optional parts Spout with Micro sprayer Micro spray spout, manufactured from aluminum with a precision brass nozzle. Used for micro-fine spraying of low viscosity oils and self-lubricating and non-aggressive liquids. 599694 Spout with micro sprayer. Dimensions: 10mm diameter x 118mm long Spout with applicator brush Used to apply a consistent lubricant film over a larger area. 599695 Applicator spout. Dimensions 15mm diameter x 135mm long 599696 599697 PRESSOL, INDUSTRIAL FLUID SPRAYER Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use. 599699 500cc. 281mm high x 90mm diameter 599700 750cc. 313mm high x 100mm diameter 599701 1 000cc. 341mm high x 110mm diameter 599728 PRESSOL, SPRAYFLXX SOLVENT PLUS 1.5 LITER Workshop spray can with a separate hand pump and spray knob. Used for ketone fluids, such as acetone and most of the hydrocarbons, as well as all low viscosity oils, cold cleaners, brake cleaners, thinners, silicone removers and alcohols such as isopropyl. Comes with a transparent HDPE (high density polyethylene) 1.5 liter container, that can be filled to a maximum of 1.2 liters, and comes with a scale in ml. Max. 2.5 bar, with over-pressure / venting valve. With a PA (polyamide) pump head and a PA flat spray nozzle with a 110° spray angle that sprays up to 192ml/min. Temperature range +5°C to +30°C. Dimensions: Base 230mm x 120mm x 325mm high. Weight 0.45kg. 599728 Spray can for solvents 599699 599700 599701
RkJQdWJsaXNoZXIy ODQ0NDEw