279 GENERAL TOOLS NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM NES, INNER THREAD REPAIR TOOL Hand tool used to restore up to 60% damaged threads on internal threaded parts. Comes with special hardened HSS tool steel blade. The cutting blade is extended or retracted by rotating the serrated knob. After retracting the blade and inserting the tool, the knob is rotated to extend the cutter into an undamaged part of the threads. Automatically adjusts to the thread pitch since the blade is guided by chasing undamaged sections of the threads. The yellow nylon is used to counteract the forces of the cutting blade and prevent rubbing damage to the internal threads. Compatible with M8 to M11 or 5/16" to 7/16" diameter threads. - Auto guided by existing threads - Removes rust and burrs - Automatically chases good threads to repair / regroove damaged sections - Hand tool - Hardened HSS tool steel cutting blades - For any thread diameter, inch or metric from M8 to M11 or 5/16" to 7/16" - For any pitch - For right or left-hand threads 951183 Inner threads in nuts and threaded holes NES, OUTER THREAD REPAIR TOOL For professional workshop use. Hand tool used to restore up to 60% damaged threads on bolts, studs and other external threaded parts. Comes with special hardened HSS tool steel blades. Installs to the thread diameter by rotating the serrated knob, after which the bolt is rotated in the tool. Automatically adjusts to the thread pitch since the blades are guided by chasing undamaged sections of the threads. Compatible with M4 to M19 or 5/32" to 3/4" diameter threads. - P rofessional choice for workshop use - D ual cutting blades, hardened HSS tool steel - Auto guided by existing threads - R emoves rust and burrs - Automatically chases good threads to repair / regroove damaged sections - H and tool - For any thread diameter, inch or metric from M4 to M19 or 5/32" to 3/4" - F or any pitch - F or right or left-hand threads 951182 O uter threads. Bolts, studs and other external threaded parts 951182 951183 951184 NES, THREADMATE™ EXTERNAL THREAD REPAIR TOOL Hand tool to quickly clean & restore external threads, for home use. Installs to the thread diameter by rotating the knob, after which the tool is rotated around the bolt / stud. Automatically adjusts to the thread pitch since the blades are guided by chasing undamaged sections of the threads. Compatible with M4 to M13 or 5/32" to 1/2" diameter threads. - E conomical choice - S ingle cutting blade, hardened HSS tool steel - Auto guided by existing threads - R emoves rust and burrs - Automatically chases good threads to repair / regroove damaged sections - For any thread diameter, inch or metric from M4 to M13 or 5/32" to 1/2" - H and tool - F or any pitch - F or right or left-hand threads 951184 Outer threads. Bolts, studs and other external threaded parts 1. Open Turn handle (A) to raise floating blades (B). Place the Nes External tool over thread to be repaired. 2. Close Turn handle (A) to lower floating blades into grooves of thread and tighten by hand only. 3. Turn Turn the Nes External tool in direction of the arrow. EXTERNAL TOOLS GUIDE: 1. Insert Turn knurled knob (K) to fully retract the blade (B) into housing (H). Insert Nes Internal tool into the threaded hole or bore to be repaired. 2. Adjust Turn knurled knob (K) to extend blade (B) into a thread groove on an undamaged section and tighten by hand only. 3. Rotate Rotate the Nes Internal tool by the cross-rod, as shown, in the desired direction. EXTERNAL TOOLS GUIDE: TIRAX, TOOL BAGS Your reliable compagnion for short or long trips. 24/7 ready to solve most technical issues or maintenance while on a trip, or at home. Metric sizes. Tirax Stelvio toolbag 951179 44-piece. - 1/4" 50mm long bits: 18 pieces - Rachet: 1/4" drive with 60 teeth - Extension: 100mm - 1/4" Bit adapter - 1/4" Screwdriver bit adapter - 12-point sockets with 1/4" drive: 6 / 7 / 8 / 10 / 12 / 13 / 14mm - 1/4" drive swivel joint - Folding lock blade knife - Combination pliers: 160mm long - LED flashlight - Volt test light: 6 to 24 Volt - Universal electrical wire: 2 meters - Universal emergency control cable - Binding wire - 18mm tape - 6 x tie-wrap - Kukko universal grease - Valve cap tool. Clean hands when inflating tires - Textile roll bag - Weight: 1.6kg Tirax Gira toolbag 951181 32 piece. - Open end wrench sizes: 8x10 / 12x13 / 14x15 - 12-point sockets with 1/4" drive: 6 / 7 / 8 / 10 / 12 / 13 / 14mm - 1/4" drive swivel joint - Bit holder: 1/4" drive - Rachet: 1/4" drive with 60 teeth - Extension: 100mm - 1/4" 50mm long bits: 16 pieces - Volt test light: 6 to 24 Volt - Multitool - Textile roll bag - Weight: 1.1kg 951179 951181
RkJQdWJsaXNoZXIy ODQ0NDEw