www.zodiac.nl 20-019 022600 Left side single outlet 022601 Right side single outlet 022602 Downward single outlet These petcocks are highly polished and than chrome plated, a real "Wannahave" for each custom builder with eye for detail. Petcocks are designed to maximize fuel flow in both main and reserve modes. Feature 22mm metric petcocks fit all 1975 thru 2006 carburetor equipped Big Twin and Sportster models as well most Custom tanks. 4978 CHROME PETCOCK 752897 Tank Cure Aluminum Tank Cleaner 752898 Optional Thinner for Tank Cure Primer for aluminum tanks 752899 Tank Cure Aluminum Tank Primer 752900 Tank Cure Steel Tank Cleaner 752901 Tank Cure Rust Remover 752902 Tank Cure Epoxy Remover 752903 450gr. Tank Cure Epoxy Coating for tanks up to 20 liters (5.3 Gallon) 752904 600gr. Tank Cure Epoxy Coating for tanks up to 26 liters (6.9 Gallon) Tank Cure is an epoxy based inner coating for steel gas tanks. It can be used to coat new tanks before priming and painting. Also great to fix rusted gas tanks, even with small leakages at the bottom. It gives a tough coating that will last for years and is also resistant to fuel containing up to 10% Ethanol. •For new steel tanks use Tank Cure Cleaner before applying Tank Cure Epoxy Coating. •For aluminum tanks use Tank Cure Aluminum Tank Cleaner, than Tank Cure Aluminum Tank Primer and finally apply Tank Cure Epoxy Coating. •For rusted tanks use Tank Cure Steel Tank Cleaner, than Tank Cure Rust Remover and finally apply Tank Cure Epoxy Coating. •Tanks that need a new internal coating because the old one has come to the end of its life span must be cleaned with Epoxy Remover first. •Tank Cure products come with detailed instructions. Read carefully and make sure you understand them completely before use. You are using chemicals which are harmful when used incorrect. •It takes 7 days before you can use the tank as the Tank Cure Epoxy Coating has to dry out completely. Note: Not for use with plastic, fiberglass or any other composite material tanks due to chemical reaction. 4975 TANK CURE EPOXY TANK COATING 345228 Flat Side tank mounting kit A complete mounting kit that can be used to update your existing Flat-Side tank mounts, or for use on newly constructed vehicles instead of purchasing the original parts. The beveled washers and mounting screws are chrome-plated. Fits 1984 thru 2017 Softail, and all other models with split tanks from 1985 to present. 4973 FLATSIDE TANK MOUNTING KIT 011498 Flat-Side tank mounting kit for early frames An easy-to-install mounting kit, which makes it possible to mount the late style Flat-Side gas tank on your early style 4 Speed Big Twin frame. The rubber isolation will prevent the damage of leaking fuel by breaking welds. Kit comes complete with all brackets and necessary hardware. 4972 FLATSIDE TANK MOUNTING KIT FOR EARLY FRAMES 346103 Mounting kit for Softail tank A complete mounting kit to install a one piece gas tank on a Softail model. Same kit as supplied with our one piece Softail gas tanks. 4971 MOUNTING HARDWARE KIT FOR ONE PIECE SOFTAIL GAS TANK 358084 Rubber mounts, set of six (OEM 11447 with collar 5775) Accurate reproductions of the Original Equipment parts used to mount the Flatside gas tanks on 4 Speed FX models from 1985 thru 1986, and all Softail models 1984-2017. 4970 RUBBER MOUNTS FOR FLATSIDE GAS TANKS 782130 Weld-on bracket for restoration or repair on 1955 thru 1957 Big Twins 4969 LOWER TANK MOUNT FOR 1955 THRU 1957 BIG TWIN GAS TANK MOUNTING HARDWARE *ș6Ϝ 2ȡ/ 7ș1ȣ (Site 1217)
RkJQdWJsaXNoZXIy ODQ0NDEw