www.zodiac.nl 07-077 Fits 1999 to present Twin Cam, 2017 to present Milwaukee Eight, as well as 2000 to present Sportster and air colled Buell models 231476 Standard diameter Hydrosolid tappet Fits Evolution Big Twin models 1984 thru 1999, XL and Buell models 1986 thru 1990 231459 Standard diameter Hydrosolid tappet 711295 +.002" oversize 711296 +.005" oversize Fits 1991 thru 1999 Sportster and Buell models 231477 Standard diameter Hydrosolid tappet This amazing tappet has broken the barriers of previous tappet designs. It performs like a hydraulic tappet from 0 to about 5.500 rpm at this RPM it becomes a solid, adding about 3 to 6 more useable horsepower. Another important feature is that Hydrosolid tappets have a built-in anti pump device. Available for Evolution Big Twins 1984 thru 1999, Twin Cam 1999 to present, and Evolution Sportster and Buells 1986 to present. For 1999 to present Twin Cam, and 2000 to present Sportster and Buell models there are also Special Application Hydrosolid tappets available. These are 1/4" longer, for high lift cams ground on a small base circle. Because of the limited space in the Twin Cam case, the travel is limited for high lift cams, but by using a performance high lift cam ground on a small base circle more travel of the tappet is achieved. A .700" valve lift is possible. Special application tappets are designed to be installed by the most advanced engine builder as modifications must be made to tappet covers. All Hydrosolid tappets are sold individually and must be used with adjustable pushrods. 2100 JIMS HYDROSOLID TAPPETS E. Fits Big Twin models 1984 thru 1999, must use adjustable pushrods (OEM 18523-86) 235925 Big Axle standard (outside diameter is .8425") 235926 Big Axle +.005" oversize D. Fits Big Twin models 1948 thru 1984, must be installed with tappet screws and nuts that match your pushrods (OEM 18492-48) 235738 Big Axle standard (outside diameter .731") 235739 Big Axle +.005" oversize 233416 Tappet screws with 3/8" ball end (pack of 4) 233434 Tappet screws with 5/16" ball end (pack of 4) 233399 Tappet screw nuts (set of 4) C. Fits Evolution Sportster models 1991 thru 1999, must use adjustable pushrods (OEM 18526-89) 235729 +.005" oversize B. Fits 4 Speed Evolution Sportster models 1986 thru 1990, must use adjustable pushrods (OEM 18523-86) 235925 Big Axle standard (outside diameter is .8425") 235926 Big Axle +.005" oversize A. Fits Sportster models 1957 thru 1985, must be installed with tappet screws and nuts that match your pushrods (OEM 18508-52B) 235734 Big Axle standard size (outside diameter .731") 235735 Big Axle +.005" oversize 233416 Tappet screws with 3/8" ball end (pack of 4) 233434 Tappet screws with 5/16" ball end (pack of 4) 233399 Tappet screw nuts (set of 4) Jims' American made solid tappet assemblies are made from aircraft quality American steel, precision machined, heat treated and ground to less than .0002" total indicator readings at a 16 finish. Available in standard or .005" oversize. The Big Axle tappets feature extra thick tappet rollers that have increased strength and won't deform when used in combination with High Lift Performance cams. 2098 AMERICAN MADE SOLID TAPPET ASSEMBLIES 741177 Standard size Fat Axle Hydra-Solid tappet These Hydra-Solid tappets have the same "Race Proven" quality features as the Fat Axle tappets but as an extra feature Hydra-Solid tappets give you the combination of the best of the hydraulic tappet and the solid tappet. They act like a normal hydraulic tappet from zero to 5.500 rpm, but as soon as your engine exceeds the 5.500 rpm the tappet acts as a solid tappet, adding some 3 to 6 useable horsepower. These tappets are precision machined, than heat treated and finally ground to less than .0002" total readings at a 16 finish. They are called "Fat Axle" because they feature an extra thick roller pin and extra thick rollers for increased roll strength and will not deform, even when used with extreme high lift cams. Strongly recommended when using Performance cams as they give zero valve lash, and zero hydraulic collapse. These tappets are extremely competitively priced but still are the best money can buy. Fit in conjunction with adjustable pushrods in 1984-1999 Evolution Big Twin, and 1986-1990 Evolution Sportster. Tappets have stock .8425" diameter and are sold each. 2096 TP DEVELOPMENTS HYDRASOLID FAT AXLE TAPPETS 741175 Standard size Fat Axle hydraulic tappet (OEM 18522-53A) Developed exclusively for Zodiac by TP Developments and made from the best alloy steel available today. These tappets are precision machined, then heat treated and finally ground to less than .0002" total readings at a 16 finish. They are called "Fat Axle" because they have increased roll strength and will not deform, even when used with extreme high lift cams. These extremely competitive priced tappets include the hydraulic unit and are the best tappets money can buy. Fits 1953 thru 1964 Panhead and 1965 thru 1984 Shovelhead with adjustable pushrods with 1/4" lower ball heads. Tappets have the stock .731" diameter and sold each. Note: The oversized "Fat Axle" roller axles may require a small modification in some stock tappet blocks. Alternatively order ZPN 131182 or 131183 .Lifter Blocks. 2095 TP DEVELOPMENTS "FAT AXLE" HYDRAULIC TAPPETS FOR 1953 THRU 1984 BIG TWINS 231491 Solid, fits 1948-1952 Big Twins equipped with solid lifters. Can also be used to convert 1953-1984 to solid tappets (OEM 18492-48). American made tappet assemblies for Big Twin models 1948 thru 1984. 2094 TAPPET ASSEMBLIES 795077 Set of four tappets with hydraulic units for 1953-1965 Panhead and 1966-1984 Shovelhead (OEM 18522-53) Precision machined tappets complete with premium hydraulic units. 27876 S&S TAPPETS FOR 19531984 BIG TWIN Fits 1991-1999 Evolution Sportster and 1991-1999 Buell 780956 Hydraulic valve tappet (OEM 18526-89A) Stock replacement hydraulic tappets are made to close tolerances. Four needed per engine. 27989 HYDRAULIC TAPPETS FOR 19911999 SPORTSTER TAPPETS (Ȧ*ȡ1ȝ (Site 487)
RkJQdWJsaXNoZXIy ODQ0NDEw