www.zodiac.nl 11-009 FINAL DRIVE BELT SPROCKETS )ȡ1ș/ 'Ȫ,Ȯ( 3177 ANDREWS MILWAUKEE EIGHT BELT PULLEYS 3175 MILWAUKEE EIGHT FINAL BELT DRIVE FRONT PULLEYS 3173 OFFSET FINAL DRIVE PULLEYS 3172 FINAL BELT DRIVE PULLEYS Machined from heat-treated, gear-quality steel in the USA by Andrews. Available in stock size 32 tooth, the smaller 31 tooth pulley increases acceleration, while the 34 tooth gear gives a higher top speed at less RPM. Installation of non-stock size pulleys usually requires the use of a longer or shorter final drive belt. Fits 2017 to present Milwaukee Eight Touring & Trike and 2018 to present Milwaukee Eight Softail. Stock replacement final drive front pulleys. Available in stock size 32 tooth, the smaller 31 tooth pulley increases acceleration, while the 34 tooth gear gives a higher top speed at less RPM. Installation of non-stock size pulleys usually requires the use of a longer or shorter final drive belt. Fits 2017 to present Milwaukee Eight Touring & Trike and 2018 to present Milwaukee Eight Softail. Zodiac offers off-set transmission pulleys in 1/2", 9/16", 3/4" and 1" off-set to allow the Custom Bike Builder to install wide tire conversions without offsetting the transmission. Pulleys feature precision hobbed teeth and are machined to close tolerances for long service. Available in 29, 32 or 34 tooth to enable you to install the final drive ratio of your choice. Stock equipment on all 5-speed Big Twin models is the 32 tooth pulley. A larger pulley will increase top speed but reduce acceleration and is usually used on large displacement High Torque engines. Note: Although 2000 and later models use the narrow (1 1/8" instead of 1 1/2") final belt and rear pulley, the front pulley width has remained unchanged. Precision machined final belt drivetransmission pulleys. Made out of heat-treated quality steel alloy. Available in 29, 30, 32 or 34 teeth to enable you to install the final drive ratio of your choice. Stock equipment on all 5 speed Big Twin models is a 32 tooth pulley. Smaller transmission pulleys let your bike pull harder but will give a lower top speed, a larger transmission pulley is used for big displacement high torque and powerful engines. Note: Although 2000 and later models use the narrow (1 1/8" instead of 1 1/2") final belt and rear pulley, the front pulley width has remained unchanged. Fits 1985 thru 1993 models 193012 29 Tooth 193010 30 Tooth 193011 Front, 32 tooth (OEM 40210-85C) 193013 34 Tooth Fits 1994 thru 2006 models, except 2006 Dyna 193040 29 Tooth 3178 OFFSET DRIVE PULLEYS FOR VROD 3176 ANDREWS BELT PULLEYS FOR 6SPEED TWIN CAMS 3174 BELT PULLEYS FOR DYNA, SOFTAIL AND TOURING 29 Tooth belt pulley, fits 1985 thru 1993 models 193066 3/4" Off-set 193065 1" Off-set 32 Tooth belt pulley, fits 1985 thru 1993 models 193058 1/2" Off-set 193056 3/4" Off-set 193055 1" Off-set 34 Tooth belt pulley, fits 1985 thru 1993 models 193076 3/4" Off-set 193075 1" Off-set 29 Tooth belt pulley, fits 1994 thru 2006 models, except 2006 Dyna 193042 3/4" Off-set 193041 1" Off-set 193002 31 Tooth 193001 Stock size 32 tooth (OEM 35000152) 193000 34 Tooth 745339 31 Tooth 745341 Stock size 32 tooth (OEM 35000152) 745340 34 Tooth These Rick's off-set drive pulleys are for use on V-Rod models when converting to wider than stock wheels. Must be used in conjunction with matching off-set parts for the wheel and rear pulley to keep the drive belt in line. Available in 29 and 30 tooth, with an off-set of 8, 28, 33, 38, 42 or 55mm. These American made belt pulleys fit Twin Cam models with the OEM6-speed transmission, such as 2006 thru 2017 Dyna, 2007 thru 2017 Softail and 2007 thru 2016 Touring. The pulley with 30 teeth increases acceleration, the 34 teeth pulley will reduce engine speed with 180 RPM at 60 MPH (96 km/h). 34 Tooth pulley does not fit 2014 thru 2016Touring. These belt pulleys are stock replacement for the late Twin Cam models with the OEM6-speed transmission, such as 2006 thru 2017 Dyna, 2007 thru 2017 Softail and 2007 thru 2016 Touring. Fits VRSCA V-Rod models 2002 thru 2003 741218 28mm Off-set (30 Tooth) 741223 38mm Off-set (30 Tooth) 741224 42mm Off-set (30 Tooth) 233002 34 teeth 234571 32 teeth (stock) (OEM 40659-06) 234570 31 teeth 233003 30 teeth 193205 Drive pulley, 32 teeth (OEM 40659-06) 396057 1/4" (6mm) offset drive pulley, 32 teeth (as supplied in 2014-up offset kit ZPN 701956) Fits V-Rod models 2004 thru 2017 756319 33mm Off-set (30 Tooth) 756317 38mm Off-set (29 Tooth) 756323 42mm Off-set (30 Tooth) 756324 55mm Off-set (30 Tooth) 32 Tooth belt pulley, fits 1994 thru 2006 models, except 2006 Dyna 193038 1/2" Off-set 193037 9/16" Off-set 193036 3/4" Off-set 193035 1" Off-set (Site 745)
RkJQdWJsaXNoZXIy ODQ0NDEw